I hope you like this project - it's simple and lots of fun to do.
woven trivet diy
I have been collecting the selvage from my sewing projects and thought this was a fun way to use the material to create a nice trivet or little mat. if you don't have selvage scraps you can use and old shirt or pants and cut up strips to use. wool sweaters are really nice after the project you can wash it in hot water and it will felt nicely. this is also a nice project for kids.
what you need:
-four pieces of stretcher frame (I used 10 in.) - hammering into a scrap piece of wood works good too.
-nails and hammer
-scissors (not shown in picture)
-cardboard approx. 1.5 x 5 in. (not shown in picture)
-cut up scrap fabric (I used selvage that I have been collecting)
before you begin put the four corners together to create the frame and hammer nails about 3/4 in. apart - take the fabric and tie onto the first corner and begin to wrap around the nails on the top and bottom as shown.
take the cardboard and cut triangular notches with the scissors - take the fabric from the ball and wrap it around the cardboard (this will be your shuttle)
tie a knot to the first row
take the cardboard shuttle and begin to weave under and over - continue this way until you reach the other side and tie down the end piece.
remove the loops from the nails - and because it was under tension the loops will fill in from the expansion.
hope you will give it a try - thanks.